Comparison on abrasive wear of SiCrFe, CrFeC and Al2O3 reinforced Al2024 MMCs

Basit Öğe Kaydı
dc.contributor.authorYilmaz, Serdar Osman
dc.date.accessioned2026-08-12T18:12:42Z
dc.date.issued2007
dc.departmentFırat Üniversitesi
dc.description.abstractThe effects of volume fraction and size of SiCrFe, CrFeC, and Al2O3 particulates on the abrasive wear rate of compo-casted Al2O24 metal matrix composites (MMCs) were studied. The process variables like the stirring speed, position and the diameter of the stirrer have affected the diffusion between particulates and matrix. The abrasive wear rate was decreased by the increase in particulate volume fraction of SiCrFe and CrFeC intermetallic reinforced composites over 80 grade SiC abrasive paper. The wear rates of the all composites decreased with aging treatment, and the best result was seen for the composite having a hybrite structure as SiCrFe and CrFeC particulates together. Nevertheless, the fabrication of composites containing soft particles as copper favors a reduction in the friction coefficient. (c) 2006 Elsevier Ltd. All rights reserved.
dc.identifier.doi10.1016/j.triboint.2006.04.008
dc.identifier.endpage452
dc.identifier.issn0301-679X
dc.identifier.issn1879-2464
dc.identifier.issue3
dc.identifier.startpage441
dc.identifier.urihttps://doi.org/10.1016/j.triboint.2006.04.008
dc.identifier.urihttps://hdl.handle.net/11508/64012
dc.identifier.volume40
dc.identifier.wosWOS:000242523100004
dc.identifier.wosqualityQ1
dc.indekslendigikaynakWeb of Science
dc.language.isoen
dc.publisherElsevier Sci Ltd
dc.relation.ispartofTribology International
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanı
dc.rightsinfo:eu-repo/semantics/closedAccess
dc.snmzKA_WoS_20260511
dc.subjectmetal matrix composites (MMCs)
dc.subjectwear
dc.subjectAl2024
dc.titleComparison on abrasive wear of SiCrFe, CrFeC and Al2O3 reinforced Al2024 MMCs
dc.typeArticle

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu