Recovery of Gold and Silver from Metallurgical Slags Using Industrial Scale Shaking Tables

dc.contributor.authorAıta, Mohamed Saleh Mohamed
dc.contributor.authorHacıfazlıoğlu, Hasan
dc.date.accessioned2026-08-12T15:06:01Z
dc.date.issued2025
dc.departmentFırat Üniversitesi
dc.description.abstractIn this study, the recovery of gold and silver remaining in the metallurgical slag using the gravity method, which is an environmentally friendly method, was investigated. For this purpose, two different industrial-scale gravity devices were used. Coarse enrichment was applied with the classic shaking table, and the concentrate was cleaned with the Gemini table. Additionally, various operating parameters have been optimized in the classic shaking table for optimum recovery of gold and silver. The most ideal conditions include an appropriate combination of table inclination, table speed, feed solids rate and wash water speed. Experiments were carried out with slag sample containing 7.80 ppm Au and 131 ppm Ag. The slags were ground to below 150 ?m grain size in the ball mill and then fed into the gravity devices. In the final concentrate obtained, the Au grade was found to be 109.24 ppm and the Ag grade was 1692.71 ppm. According to the final results, 56.16% of the gold and 51.82% of the silver in the slag were recovered.
dc.description.abstractBu çalışmada, metalurjik cüruf içerisinde kalan altın ve gümüşün çevre dostu bir yöntem olan gravite yöntemi ile geri kazanımı araştırılmıştır. Bu amaçla, endüstriyel ölçekli iki farklı gravite cihazı kullanılmıştır. Klasik sallantılı masa ile kaba zenginleştirme, Gemini masası ile konsantreye temizleme işlemi uygulanmıştır. Ayrıca, altın ve gümüşün optimum düzeyde geri kazanımı için klasik sallantılı masada çeşitli çalışma parametreleri optimize edilmiştir. En ideal koşullar; masa eğimi, masa hızı, besleme katı oranı ve yıkama suyu hızının uygun bir kombinasyonunu içermektedir. Deneyler, 7,80 ppm Au ve 131 ppm Ag içeren cüruf numunesi ile yapılmıştır. Cüruflar, bilyalı değirmende 150 ?m tane boyutunun altına öğütülmüş ve ardından gravite cihazlarına beslenmiştir. Elde edilen nihai konsantrede Au tenörü 109,24 ppm, Ag tenörü ise 1692,71 ppm bulunmuştur. Nihai sonuçlara göre, cüruf içerisindeki altının %56,16’sı, gümüşün ise %51,82’si geri kazanılmıştır.
dc.identifier.doi10.35234/fumbd.1429416
dc.identifier.endpage14
dc.identifier.issn1308-9072
dc.identifier.issue1
dc.identifier.startpage1
dc.identifier.urihttps://doi.org/10.35234/fumbd.1429416
dc.identifier.urihttps://hdl.handle.net/11508/27676
dc.identifier.volume37
dc.language.isotr
dc.publisherFırat University
dc.publisherFırat Üniversitesi
dc.relation.ispartofFırat University Journal of Engineering Science
dc.relation.ispartofFırat Üniversitesi Mühendislik Bilimleri Dergisi
dc.relation.publicationcategoryMakale - Ulusal Hakemli Dergi - Kurum Öğretim Elemanı
dc.rightsinfo:eu-repo/semantics/openAccess
dc.snmzKA_DergiPark_20260511
dc.subjectChemical-Biological Recovery Techniques and Ore Dressing
dc.subjectKimyasal-Biyolojik Kazanma Teknikleri ve Cevher Hazırlama
dc.titleRecovery of Gold and Silver from Metallurgical Slags Using Industrial Scale Shaking Tables
dc.title.alternativeMetalurjik Cüruflardan Altın ve Gümüşün Endüstriyel Ölçekli Sallantılı Masalar ile Geri Kazanımı
dc.typeArticle

Dosyalar