A study on microstructure of porous TiNbZr alloy produced as biomaterialUntersuchung des Gefuges einer porosen TiNbZr-Legierung zur Herstellung von Biowerkstoff

Basit Öğe Kaydı
dc.contributor.authorKaya, M.
dc.contributor.authorYakuphanoğlu, Fahrettin
dc.date.accessioned2026-08-12T17:05:21Z
dc.date.issued2019
dc.departmentFırat Üniversitesi
dc.description.abstractIn the present study, titanium-based biomaterial (Ti-10Nb-10Zr) with different porosity was fabricated by sintering at different temperatures. The porosity of fabricated samples is close to natural bone; also the compression strengths of the samples are higher than that of natural bone. The phases named alpha and beta are seen in the microstructure of samples fabricated, but alpha phase partially converts into beta phase with increasing sintering temperature. Porosity decreases with increasing sintering temperature, and compressive strength increases with decreasing porosity. Elastic modules of fabricated samples are close to natural bone, so these materials don't cause wear of bone.
dc.description.sponsorshipFirat University [FF16.12]
dc.description.sponsorshipThis study was supported by Firat University, for Ph.D. thesis (Project No. FF16.12)
dc.identifier.doi10.1002/mawe.201800235
dc.identifier.endpage746
dc.identifier.issn0933-5137
dc.identifier.issn1521-4052
dc.identifier.issue6
dc.identifier.orcid0000-0001-9710-2254
dc.identifier.scopus2-s2.0-85067418409
dc.identifier.scopusqualityQ3
dc.identifier.startpage742
dc.identifier.urihttps://doi.org/10.1002/mawe.201800235
dc.identifier.urihttps://hdl.handle.net/11508/49073
dc.identifier.volume50
dc.identifier.wosWOS:000471804800008
dc.identifier.wosqualityQ4
dc.indekslendigikaynakWeb of Science
dc.indekslendigikaynakScopus
dc.language.isoen
dc.publisherWiley-V C H Verlag Gmbh
dc.relation.ispartofMaterialwissenschaft und Werkstofftechnik
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanı
dc.rightsinfo:eu-repo/semantics/closedAccess
dc.snmzKA_WoS_20260511
dc.subjectTiNbZr alloy
dc.subjectporous materials
dc.subjectbiomaterials
dc.subjectmicrostructure
dc.subjectsintering
dc.titleA study on microstructure of porous TiNbZr alloy produced as biomaterialUntersuchung des Gefuges einer porosen TiNbZr-Legierung zur Herstellung von Biowerkstoff
dc.title.alternativeUntersuchung des Gefüges einer porösen TiNbZr-Legierung zur Herstellung von Biowerkstoff
dc.typeArticle

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu