Interface microstructure of porous Ni-Ti and Co-Cr-Mo powder alloy couple fabricated by SHS process

dc.contributor.authorKurt, B.
dc.contributor.authorSomunkiran, I.
dc.date.accessioned2026-08-12T17:30:08Z
dc.date.issued2008
dc.departmentFırat Üniversitesi
dc.description.abstractIn this study, porous Ni-Ti and Co-Cr-Mo alloy couple was fabricated by powder metallurgy (PM) process. With this aim, Ni-Ti and Co-Cr-Mo alloys powder was compacted into the mould one by one with Co-Cr-Mo being the one side and Ni-Ti the other side. Then, Ni-Ti side of the specimen was synthesised by self-propagating high temperature synthesis (SHS) process. At the end of the SHS process (after the SHS process), the porous Ni-Ti alloy has occurred. Finally, the specimen was sintered at 1050 degrees C into argon atmosphere. Scanning electron microscope with energy dispersive X-ray spectroscopy and X-ray diffractometer were used to characterise the microstructure and composition. It was seen from the results that porous Ni-Ti and Co-Cr-Mo alloy couple was successfully fabricated by PM process.
dc.identifier.doi10.1179/174329008X284967
dc.identifier.endpage256
dc.identifier.issn0032-5899
dc.identifier.issue3
dc.identifier.scopus2-s2.0-57049088468
dc.identifier.scopusqualityQ2
dc.identifier.startpage254
dc.identifier.urihttps://doi.org/10.1179/174329008X284967
dc.identifier.urihttps://hdl.handle.net/11508/55962
dc.identifier.volume51
dc.identifier.wosWOS:000260780500027
dc.identifier.wosqualityQ2
dc.indekslendigikaynakWeb of Science
dc.indekslendigikaynakScopus
dc.language.isoen
dc.publisherManey Publishing
dc.relation.ispartofPowder Metallurgy
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanı
dc.rightsinfo:eu-repo/semantics/closedAccess
dc.snmzKA_WoS_20260511
dc.subjectPorous Ni-Ti
dc.subjectCo-Cr-Mo alloy
dc.subjectPowder metallurgy
dc.subjectMicrostructure
dc.titleInterface microstructure of porous Ni-Ti and Co-Cr-Mo powder alloy couple fabricated by SHS process
dc.typeArticle

Dosyalar