Wear Properties of Fe-Cr-C and B4C Powder Coating on AISI 316 Stainless Steel Analyzed by the Taguchi Method

Basit Öğe Kaydı
dc.contributor.authorGur, Ali Kaya
dc.contributor.authorOzay, Cetin
dc.contributor.authorOrhan, Ayhan
dc.contributor.authorBuytoz, Soner
dc.contributor.authorCaligulu, Ugur
dc.contributor.authorYigitturk, Necmettin
dc.date.accessioned2026-08-12T17:48:14Z
dc.date.issued2014
dc.departmentFırat Üniversitesi
dc.description.abstractIn this study, the plasma arc welded cladding of FeCrC and B4C powder mixtures alloyed with 70 wt.-% Cr on the surface of AISI 316 stainless steel was investigated. Application of the Taguchi method revealed respective effects on the abrasive wear resistance of the cladding layer on the stainless steel. The abrasive wear behaviour of the AISI 316 stainless steel surfaces coated with Fe-Cr-C and with 10 wt.-%, 15 wt.-%, 20 wt.-%, and 25 wt.-% B4C was investigated by using four loads and four distances for the 220 mesh SiC abrasive. Results were analyzed by variance analysis using ANOVA, and effects of parameters on the wear rate were determined as percentage rate. Furthermore, the error ratio was statistically evaluated. The experimental results were analyzed by the respective analysis of means and variance which is discussed in detail.
dc.description.sponsorshipFirat University, Turkey [FUBAP-1846]
dc.description.sponsorshipThe authors would like to thank Firat University, Turkey for the financial support (Project No. FUBAP-1846).
dc.identifier.doi10.3139/120.110578
dc.identifier.endpage398
dc.identifier.issn0025-5300
dc.identifier.issue5
dc.identifier.orcid0000-0001-9958-519X
dc.identifier.orcid0000-0003-4862-7219
dc.identifier.orcid0000-0001-6077-1892
dc.identifier.scopus2-s2.0-84900818388
dc.identifier.scopusqualityQ2
dc.identifier.startpage393
dc.identifier.urihttps://doi.org/10.3139/120.110578
dc.identifier.urihttps://hdl.handle.net/11508/61350
dc.identifier.volume56
dc.identifier.wosWOS:000339719600007
dc.identifier.wosqualityQ1
dc.indekslendigikaynakWeb of Science
dc.indekslendigikaynakScopus
dc.language.isoen
dc.publisherCarl Hanser Verlag
dc.relation.ispartofMaterials Testing
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanı
dc.rightsinfo:eu-repo/semantics/closedAccess
dc.snmzKA_WoS_20260511
dc.subjectMaterials testing
dc.subjectTaguchi procedure
dc.subjectplasma transferred arc cladding
dc.subjectB4C
dc.titleWear Properties of Fe-Cr-C and B4C Powder Coating on AISI 316 Stainless Steel Analyzed by the Taguchi Method
dc.typeArticle

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu