Investigation of pin joint performances of damaged composites repaired with adhesively patches

Abstract

In this study, the failure analysis of composite plates repaired with adhesive patch was investigated experimentally and numerically. The failure analysis consisted of two steps: In the first step, the damaged composite plates used in previous studies were repaired with epoxy-based adhesive and patch. In the second step, the repaired composite plates were loaded with pin and the failure analysis was realized. The four-layered unidirectional carbon/epoxy composite plates were used as composite and patch materials. The layer configuration of the composites was selected as [0 degrees/theta degrees](s) and [0 degrees/theta degrees](2). The numerical study was carried out in ANSYS by using three-dimensional progressive failure codes. As a result of the studies, the failure loads of repaired composite plates were compared with the un-damaged plates. It was determined that the failure loads of adhesively repaired composite plates increased between 238% and 514%.